| |  | AMAZON'S
| TEAK LUSTRE
| WATER-BASED ACRYLIC TEAK COATING
| | This waterbased acrylic teak coating is quite different from anything known on the market today. The fact that Teak Lustre is a single part WATERBASED product makes it a standout, but adding to that, it’s quick drying ability of 10-15 minutes for handling and 30-45 minutes for sanding between coats easily allows the recommended three (3) coats to be applied in a single day. Also, application is easy using a brush or roller, it is self-leveling, dries clear and once applied (3 coats) will keep teak looking great, even out in the sun, for up to THREE YEARS. Coverage is approximately 100 sq.ft. per quart for the first coat and 150-175 sq.ft. per quart for each additional coat.
Note... this waterbased product can actually be applied over Amazon’s Teak Oil as long as the teak's surface is cleaned again before applying. Being a clear finish, Teak Lustre will not change the teak’s color however, the ability to add teak oil to darken or enhance the teak's grain and induce the typical overall honey color is a super advantage.
This is the product everyone has been asking for: One part; non-toxic; no VOC’s; easy to apply; clean up with water; clear Gloss or Satin finish that won’t change the surface color to orange; lasts up to 3 years; won’t crack or peel; and the ability to easily repair small sections rather than re-doing the entire surface.
Available in Gloss (TL-350) and Satin (TL-352) finishes, TEAK LUSTRE is packaged in easy to use wide mouth 32 oz plastic jars.
| | TL-350 | TEAK LUSTRE | 32fl.oz. | $39.99 |  | | TL-351 | TEAK LUSTRE | 32fl.oz. | $39.99 | |
|
|
|
